![]() If there is no SD Card in the Aurora(n), the time display will show “Outputs”, “Inputs”, “Play” or “SD Play”.Pressing MODIFIERS: Shift will change a stereo pair together even if the channels are unlinked in NControl. Faders can only go to 0dB, so if you push the fader to +10 on the MCU, it will jump back to 0dB. ![]() The Select button will make it the output focus and also the Monitor Out for the front panel rotary encoder. Touching a fader will make it the output focus in NControl. F8 will do the Group Swap A/B as will the foot controller (User Switch 1). The Master fader is Group A, and can be changed to Group B by pressing the “Channel Up” button (make sure you have both Group A & B enabled in NControl).NControl starts in Outputs mode where each MCU fader is 1:1 with the output faders in NControl.Channel Offset is ignored for the MIDI Fighter Twister as it supports 64 channels at once. Auto Detect will only work for non-emulated devices (the actual Mackie MCU Pro or actual Mackie XT Pro), but manual select should work for emulated devices.It will select the Aurora(n) based on which device is in the foreground when you enable the MIDI Control Surface. The MIDI Control Surface may only talk to a single Aurora(n) at a time.Added support for MIDI Control Surfaces: Mackie MCU Pro Mackie XT Pro DJ Tech Tools MIDI Fighter Twister. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |